FEATURES

• Accepts Voltage, current and millivolt signals from all type of transducers
• Easily scalable from front keys
• Three programmable alphabets for showing engineering units e.g. PSI, Lbs, etc.
• Programmable time base for rate
• Selectable decimal point to 1000th place
• Auto/manual scanning with HOLD feature
• Two relays and one audio/visual output per channel (optional)
• Output status indication on front panel
• Keeps track of process run time
• Built-in buzzer (with alarm option)
• Captures Min/Max readings
• Shows channel differentials
• Security password for preventing unauthorized program changes

SPECIFICATIONS

INPUT TYPE:
i) Loop Current: 4-20ma, 0-50ma
ii) Voltage: 0-5vdc, 0-10vdc
iii) Millivolt: 0-100millivolt
Other Inputs available: Consult Factory
ACCURACY:
Voltage = 0.05% FS
Current = 0.05% FS
ANALOG TO DIGITAL CONVERSION:
20,000 count A/D converter
Dual slope integrating converter.
Conversion rate: Seven conversions/sec (typical)
DISPLAY:
Red 7-segment LED display, 0.39 inch (10mm) height
Negative polarity indication. Over-range indication.
Display test: 8.8.8.8.8.8.8. on power up
CHANNEL DISPLAY TIME:
Programmable from 1-999 seconds.
ELAPSED TIME:
Displayed in hours, minutes & seconds. Display format: HHH.MM.SS

POWER OPTION:
120VAC -- 60 Hz (Standard)
220VAC -- 50 HZ (Optional)
8VDC -- 12VDC @ 900ma (optional)
SCALE/OFFSET:
Scale programmable from 1 - 30000
Offset : 0 - 20.00 (current), 0 - 10.000 (voltage ),
0 - 100.0 (millivolt)
Decimal Point: 9999, 999.9, 99.99, 9.999
RELAY/OPEN COLLECTOR OUTPUT:
Relays: Single pole single throw, 1 amp @ 28vdc or 0.5 amp @120vac
Open Collector output: 100ma maximum (internal 5vdc source).
Outputs programmable as normally open , normally closed, latching or non latching.
RATE:
Displayed as rate of process change/minute.
RATE TIME BASE:
Programmable from 1-9999 minutes.
DIMENSIONS:
Case: 3.60" x 1.75" x 8.5"
Bezel size: 4/40" x 2.25" x 0.45"